TF: 1.844.ESC(372).8877

Tek-Air Systems has worked with FieldServer to develop a bridge for the information from the SmartLab and Fume Hood Controller System over to BACNet I/P, BACNet MSTP, LON, Modbus and N2.

These devices are easily configured to be virtual controllers to the Building Management System, by using an export feature supplied with the SmartLab Configuration Software

Applications

Translaton from proprietary controller language to:

BACNet MSTP or BACNet I/P
LON
Modbus RTU
JCI N2

TECHNICAL DATA SHEET

SMARTLAB SYSTEM – SLI-N2 CONVERTER

Designed solely for use with Tek-Air’s SmartLab Control System, the SmartLab Interface Converter provides seamless integration to Johnson Controls N2 network.

The design of the SmartLab Interface Converter provides a true communications protocol converter.  There are two ports for connecting the converter.

The signals are isolated, and the communications protocol is converted from one side to the other side in a bi-directional fashion.

Applications

The SLI-N2 is included in each lab in the SmartLab network, and provides a point of connection for technicians using a computer to configure the lab controls. The SLI-N2 converter also provides isolation between the lab network it serves and the main N2 network trunk.

TECHNICAL DATA SHEET

Copyright © 2015 ESC. All rights reserved.